Any suggestions?

How to reset the maintenance mileage on a 98 Mercedes E 320. Followed the manual procedure after lube oil change but no joy. Any suggestions?

Facebook Twitter LinkedIn Telegram Whatsapp Pocket
May 17, 2020 6:41 AM

Member

Select service indicator in the multifunction display on the instrument cluster (A1) Press button (1) on the instrument cluster (A1) twice within the first 4 seconds. 6. Wait until the service indicator flashes and then jumps back to "0" The service indicator is reset.

May 29, 2020 6:11 PM

Press and hold “0″ button while turning electronic key in steering lock to position two again. The present status for days or distance displays once more. Continue to hold “0″ button for approximately 10 seconds until a signal sounds and the display shows 10 000 (15000KM) for approximately 10 seconds.

May 29, 2020 6:12 PM

Member

Press the "Down" button until you highlight "Service due." Press the "OK" button. Press the "Down" button until you highlight "Full service." Press the "OK" button. This should reset your service indicator light.

May 29, 2020 6:13 PM

Press the "Down" button until you highlight "Service due." Press the "OK" button. Press the "Down" button until you highlight "Full service." Press the "OK" button. This should reset your service indicator light.

May 29, 2020 6:14 PM

"Service D" alerts the service department that maintenance to your vehicle will take approximately four hours. Once you bring in your car, the Mercedes-Benz service adviser will determine from the vehicle's instrumentation the type of maintenance needed.

May 29, 2020 6:16 PM